Promo !

ELFR-1-QD Relais clignotant électronique LED avec Déconnexions rapides

Le prix initial était : 22,10 €.Le prix actuel est : 11,05 €.

UGS : C6C2E-495D156A3DA1 Catégorie : Marque :
Promo ! Vous économisez 11,05 € (50%)
Informations de livraisonLes délais dépendent du produit, de sa disponibilité et de l’adresse de livraison.
Droit de rétractation et retoursFrais de retour à notre charge
  • Maintains FEO Blinker flash rate pour a wide range of LED et non-Clignotants LED.
  • Quick-disconnect terminals pour compatible FEO Relais clignotant connectors. Use notre compatibility guide à confirm fitment before ordering.
  • Recommended accessory pour tous Custom LED Feux arrière LED intégrés.
  • Near zero initial turn-on delay (other LED relays delay when signals sont first engaged).
  • 1-Year Warranty & Satisfaction Guarantee.
  • Ships same business day.

Not sure if this relay fits ton Moto ? Search par Moto make, model, year, ou FEO Relais clignotant part number. Find My Relay

Overview

The ELFR-1-QD est the same Relais clignotant électronique LED as notre ELFR-1 LED Relais clignotant, but avec male quick-disconnect terminals installed sur the wires. ces terminals can plug directly into some compatible FEO Relais clignotant connectors, ou can be useful pour custom et hard-wire applications.

The ELFR-1-QD est conçu pour restore the fréquence de clignotement normale sur compatible Motos avec stock blinkers, Clignotants LED, ou any combination of both, provided the total load sur the system est within 0.05A à 10A.

Use notre Moto LED Relais clignotant Compatibility Guide à confirm whether the ELFR-1-QD est the correct Custom LED relay pour ton Moto before ordering.

Incorrect connection can permanently damage the ELFR-1-QD relay. If ton Moto est not listed dans the guide, compare ton FEO Relais clignotant connector carefully et identify the correct switched-power et load-output terminals before installation.

See the Installation Tab pour more important details.

Your Moto must ont a rectified standard 12VDC system pour this Relais clignotant à work (most bikes sont 12VDC).

Specifications

  • Minimum Rated Current : 0.05A
  • Maximum Rated Current : 10A
  • Rated Voltage : 12VDC
  • Flash Rate : Constant
  • Size : 1.2″ x 1.77″ x 0.74″

Compatibility

ELFR-1-QD Compatibility

Use notre Moto LED Relais clignotant Compatibility Guide à confirm the correct Custom LED relay before ordering. The guide includes compatible Motos, recommended Custom LED relay model, FEO relay part numbers ou relay body markings when available, et important fitment notes.

Not sure if this relay fits ton Moto ? Search par Moto make, model, year, ou FEO Relais clignotant part number. Find My Relay

Important : This guide est intended pour U.S.-spec applications unless otherwise noted. Non-U.S. models, previous owner wiring changes, et mid-year production changes may differ. When dans doubt, compare ton Moto’s original Relais clignotant connector before ordering.

If ton Moto est not listed, the ELFR-1-QD may still be usable pour many two-wire Relais clignotant systems, ou three-wire systems where the third wire est only a ground, but the correct switched-power et load-output terminals must be identified before installation.

Video

We ont a large collection of tous Custom LED Produit videos sur the Custom LED YouTube Channel.

The videos dans this playlist below sont a collection of user-submitted et original videos related à notre LED Relais clignotants.

Installation

The Custom LED ELFR-1-QD Relais clignotant électronique LED comes avec detailed installation instructions.

Installation of this Produit requires that tu identify et remove the FEO Relais clignotant sur the Moto. If tu sont unfamiliar avec la location of ton FEO Relais clignotant, ou electronics dans general, please consult a qualified technician ou ton repair manual pour additional information.

Installation of the ELFR-1-QD est as follows :

Click icon à download.
Adobe Acrobat Reader est required à view this file.
If tu sont having problems viewing the file, please download the free software here.

General installation guidance

NOTE : You may lose ton self-canceling feature par replacing the Relais clignotant if ton bike est equipped de the factory avec self-canceling Clignotants. If tu want à keep this feature, use our Stage II Égaliseurs de charge instead.

If ton existing Relais clignotant est a two wire Relais clignotant, ou a three wire Relais clignotant where the third wire est only a ground wire, et tu ont access à it, tu can replace it avec notre Relais clignotant.

Identify et connect the wires leading à the FEO Relais clignotant as follows :

  • Red wire sur ELFR-1-QD à power source (ignition switched +12v)
  • Black wire sur ELFR-1-QD à load output (lampes de clignotant / blinker switch)
  • If the factory connector a a ground wire, leave it unconnected.

If

Poids 0,085 kg
Marques Custom LED

Avis

Il n’y a pas encore d’avis.

Soyez le premier à laisser votre avis sur “ELFR-1-QD Relais clignotant électronique LED avec Déconnexions rapides”

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

Panier
ELFR-1-QD Relais clignotant électronique LED avec Déconnexions rapides Custom LEDELFR-1-QD Relais clignotant électronique LED avec Déconnexions rapides
Le prix initial était : 22,10 €.Le prix actuel est : 11,05 €.
Retour en haut